Fish Scale Pendant Lamp

Published February 27, 2013 by mytimewellspent


Every year around this time, I start to daydream about the beach and the beautiful scenery that surrounds it. My beach dreaming, coupled with my love for the fish scale pattern and obsession with unique lighting fixtures spurred the idea for this fresh and fun DIY project. The different dye baths used in the project create a ton of watery texture, while the wax technique allows light to filter through the piece and adds to that “scale like” feel. The project can be completed in an afternoon for about $20, which means all of us who can’t make it to the deep blue sea this summer can at least surround ourselves with something sea inspired! Happy creating! — Kara Paslay


Materials

  • 110# paper
  • circle cutter (available at most craft stores)
  • Rit Dye
  • paraffin wax
  • mineral oil
  • crock pot
  • extra bowl
  • white paper lantern
  • glue gun

 

Instructions

1. Use your circle cutter and use 110# paper to create around 200 circles. The 200 circles will cover a 14 in. paper lantern.

2. Place the cut circles into a bucket of Rit Dye (I used the purple and purple mixed with teal) and allow them to darken to your taste. I chose to make my circles different shades to enhance the texture of the final piece.


3. Create a double boiler with your crock pot and extra bowl. Put a block of the paraffin wax in the extra bowl to melt. Once the wax is melted, add mineral oil to thin the wax. Make sure your circles are dry and then dip each one into the wax, making sure to leave a portion of the top clean and clear of any wax. Lay the circle on wax paper to dry.


Note: Dipping the circles in the wax makes the paper transparent and allows the light to pass through it more easily.


4. Once the wax has dried, start attaching the circles to a white paper lantern. Use a glue gun and be sure to place the glue on the portion of the circle that does not have wax on it.


5. Work your way around the lantern until it is fully covered. I started at the bottom and overlapped my circles in a fish scale-like pattern so the top layer would be at the top of the lantern.


6. Use the lighting kit that comes with the lantern to create an amazing light fixture!

Note: I tested the lantern using a 60 watt compact florescent lightbulb, and the wax stayed cool and completely intact. I recommend sticking with compact florescent bulbs to keep the heat in check.

I found this at:    http://www.designsponge.com/2012/06/diy-project-fish-scale-pendant-lamp.html

Advertisements

Say You...

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: